Stand-Alone Plumbing Building Permit for work which is not related to other construction proposed for a building.
All drawings to be drawn on standardized sized sheets, drawn to scale, fully dimensioned, signed and dated.
If drawings were prepared by a qualified designer (as defined under Div. C, Part 3, Section 3.2 of the Ontario Building Code), drawings must include the designer’s name, registration number, qualification identification number, signature, and stamp/statement that the person has reviewed and taken responsibility for the design activities.
All drawings, reports, and forms, including the completed Application for a Permit to Construct or Demolish, must be provided in a PDF format.
Site plan or Key plan showing location of existing/proposed construction on the site or within the building.
Plans showing layout of plumbing and related fixtures on each floor level.
Please note: not all projects are eligible for email submission. Review the list of eligible applications and detailed email submission process.
To submit an application by email please use the ‘Email’ button on top of the Application for a Permit to Construct or Demolish.
Required when applying for a plumbing permit relating to plumbing work on private property or within buildings or structures.
Building permit application form required for all submissions
Required for all designers, except Engineers and Architects when applying for any Construction Permit. Property Owners, if exempted, from Qualification / Certification, they must fill in the form to specify the reason for exemption.
Required for all buildings where professional design and field review is required by the Ontario Building Code. This Commitment form must be signed by the owner or agent and the professional architect, engineer, or consultant.
|Permit for Heating, Ventilating and Air Conditioning (HVAC)||Fee Effective Jan. 1, 2023|
|Group A & B – All Assembly, Institutional, Restaurants||$1.77/m|
|Group C – Single Family Detached or Attached Dwellings, Townhouses:|
|Heating and Ventilating only, with no ductwork||$198.59 flat fee|
|Heating, Ventilating and Air Conditioning||$250.22 flat fee|
|Boiler/Furnace Replacement||$198.59 flat fee|
|A/C Unit Addition||$198.59 flat fee|
|Other Group C – Buildings||$1.29/m2|
|Group D & E – All Offices, Retail Stores, Mercantile Occupancies||$1.43/m2|
|Group F – Industrial, Garages, Gas Stations:|
|Small Buildings (up to 230 m2)||$214.47 flat fee|
|Other Group F – Buildings (More than 230 m2)||$0.99/m2|
|Add on System, (Unit Heater, Make-up Air Unit, Exhaust Fan) and/or Ductwork Alterations||$198.59 flat fee|
|Boiler/Furnace Replacement or A/C unit||$357.45 flat fee|
|Special Ventilation Systems|
|Commercial Kitchen Exhaust, Spray Booth, Dust Collector, etc.||$428.95 flat fee|
|Plumbing and Drainage Systems – Fixtures/Equipment/Roof Drains:|
|Single Family Dwelling||$21.45 each|
|All other Buildings||$28.61 each|
|Piping for Single Family Detached or Attached Dwellings:|
|Water services, Sanitary and Storm Buried Piping||$198.59 flat fee|
|Repairs, Replacement and Additions of Buried Plumbing and Drainage Piping, Pool Drains||$198.59 flat fee|
|Piping for all other buildings:|
|Inside Sanitary and Storm Piping||$2.42/linear metre|
|Outside Water Services, Sanitary and Storm Piping||$2.42/linear metre|
|Other Plumbing Work|
|Backwater Valves, Manholes, Catchbasins, Interceptors and Sumps Complete with Pumps||$35.75 each|
|Backflow Prevention Devices (devices requiring testing)||$85.79 each|
|Private Sewage Systems:|
|Holding Tank||$357.45 flat fee|
|Septic System||$714.92 flat fee|
Please do not include any personal information on your Building Plans (e.g., the homeowner’s name or phone number). Building Plans submitted for Permit are subject to disclosure in accordance with the Municipal Freedom of Information and Protection of Privacy Act (MFIPPA).