| Spec. No. | Title | Revision Date |
|---|---|---|
| TTS 801.100 | Construction Specification for Electrical Work - General | Jan 2012 |
| TTS 801.200 | Handover and Acceptance for Third Party Electrical Traffic Control and Intelligent Transportation System Devices | Sep 2025 |
| TTR 801.305 | Maintenance Recommendation for Traffic Signal Installation | Jan 2012 |
| TTR 801.320 | Design Recommendation for Traffic Signal Installation Location of Traffic Signal Equipment |
Sep 2025 |
| TTS 802.100 | Construction Specification for Handwells Installation | Jan 2012 |
| TTS 803.100 | Construction Specification for Duct Installation | Jan 2012 |
| TTS 804.100 | Construction Specification for Cable Installation | Jan 2012 |
| TTS 805.100 | Construction Specification for Pole Installation | Jan 2012 |
| TTS 805.200 | Materials Specifications for Steel Pole and Base Mounting | Jan 2012 |
| TTR 805.300 | Maintenance Recommendation for Traffic Poles | Jan 2012 |
| TTS 806.100 | Construction Specification for the Installation of Power Supply Equipment | Sep 2023 |
| TTS 806.200 | Standard Specification for Uninterruptible Power Supplies | Apr 2022 |
| TTR 806.300 | Maintenance Recommendation for Power Failure Procedure | Jan 2012 |
| TTS 807.100 | Construction Specification for Footings and Sidewalk Bays | Sep 2025 |
| TTS 808.100 | Construction Specification for Traffic Signal Equipment | Sep 2024 |
| TTS 808.200 | Material Specification for Traffic Signal Arms, Hangers, Fittings and Hardware | Sep 2024 |
| TTS 808.210 | Material Specification for Traffic Signal Head | Jan 2012 |
| TTS 808.220 | Material Specification for LED Traffic Signal Lamp Modules | Mar 2025 |
| TTS 808.230 | Standard Specification for Bicycle Signal Head c/w Bicycle LED Modules | Apr 2022 |
| TTS 808.240 | Standard Specification for Bicycle Signal LED Modules Material | Apr 2022 |
| TTR 808.300 | Maintenance Recommendation for Traffic Signal Head and Mast Arm Replacement | Jan 2012 |
| TTS 809.100 | Construction Specification for the Installation of Traffic Signal Controllers | Jan 2012 |
| TTS 809.210 | Material Specification for Traffic Signal Controller and Cabinet TS2 Type 1 | Jan 2012 |
| TTS 809.220 | Construction Specification for Controller Build | Sep 2025 |
| TTR 809.300 | Maintenance Recommendation for Conflict Monitor Check Procedure | Jan 2012 |
| TTR 809.305 | Maintenance Recommendation for Communication Lines Check Procedure | Jan 2012 |
| TTR 809.310 | Maintenance Recommendation for Conflict Flash Reset Procedure | Jan 2012 |
| TTR 809.315 | Maintenance Recommendation for Transit Priority and Pre-emption Check Procedure | Jan 2012 |
| TTR 809.320 | Maintenance Recommendation for Traffic Control System Pick-up Procedure | Sep 2023 |
| TTR 809.325 | Maintenance Recommendation for UPS Systems | Jan 2012 |
| TTS 810.100 | Construction Specification for Traffic Actuation Equipment | Sep 2025 |
| TTS 810.200 | Construction Specification for Accessible Pedestrian Signal Equipment |
Sep 2025 |
| TTS 810.300 | Standard Specification for Overhead Radar Detection | Sep 2023 |
| TTR 810.300 | Maintenance Recommendation for Traffic Actuation Equipment | Jan 2012 |
| TTS 811.100 | Construction Specification for Flashing Beacons | Sep 2025 |
| TTS 812.100 | Construction Specification For Pedestrian Crossover (PXO) Equipment |
Sep 2025 |
| TTS 812.200 | Standard Specification for LED Pedestrian Crossover (PXO) Fixtures Material | Apr 2022 |
| TTS 813.100 | Construction Specification for Grounding and Bonding | Sep 2024 |
| TTS 815.100 | Construction Specification for The Removal of Electrical Equipment | Sep 2024 |
| TTS 817.100 | RESCU Equipment | Jan 2012 |
| TTR 817.300 | Maintenance Recommendation For RESCU CABINETS | Jan 2012 |
| TTR 817.310 | Maintenance Recommendation for RESCU CCTV Cameras | Jan 2012 |
| TTR 817.315 | Maintenance Recommendation for RESCU Changeable Message Sign (CMS) and Portable Changeable Message Sign (PCMS) | Jan 2012 |
| Drawing No. | Title | Revision Date |
|---|---|---|
| 801.001 | Electrical Abbreviations and Symbols | Sep 2025 |
| 801.005 | Electrical Legend I | Jan 2012 |
| 801.006 | Electrical Legend II | Sep 2025 |
| 801.007 | Electrical Legend III | Jan 2012 |
| 801.008 | Electrical Legend IV | Jan 2012 |
| 801.009 | Electrical Legend V | Sep 2025 |
| 801.010 | Electrical Legend VI | Jan 2012 |
| 801.320 FIG 1 | Types of Special Arrow Heads with Backboards | Sep 2024 |
| 801.320 FIG 2 | Cone of Vision | Sep 2025 |
| 801.320 FIG 3 | Sight Line for Pedestrian Signals | Jan 2012 |
| 801.320 FIG 4 | Typical Duct Layout | Jan 2012 |
| 801.320 FIG 5 | Typical Traffic Signal Layout for a 2-Way Street | Jan 2012 |
| 801.320 FIG 6 | Typical Loop Layout | Jan 2012 |
| 801.320 FIG 7 | Typical Signage Layout for a One-Way System and Turn Prohibitions | Jan 2012 |
| 801.320 FIG 8 | Typical Traffic Signal Layout for a 2-Way Street with Opposing Left Turn Lanes | Jan 2012 |
| 801.320 FIG 9 | Typical Traffic Signal Layout with Median Islands | Jan 2012 |
| 801.320 FIG 10 | Typical Traffic Signal Layout with Median Island on One Side Only | Jan 2012 |
| 801.320 FIG 11 | Typical Traffic Signal Layout with Protected/Permissive Left Movement(s) and Median Islands | Sep 2023 |
| 801.320 FIG 12 | Typical Traffic Signal Layout for Fully Protected Left Turns | Jan 2012 |
| 801.320 FIG 13 | Pushbutton Information Signs | Sep 2025 |
| 801.320 FIG 15 | Semi-Actuated Traffic Signal (Non-APS) Pushbutton Information Sign Layout | Sep 2025 |
| 801.320 FIG 17 | Pedestrian Crossover Pushbutton Information Sign Layout | Sep 2025 |
| 801.320 FIG 18 | Split Pedestrian Crossover Pushbutton Information Sign Layout | Sep 2025 |
| 801.320 FIG 20 | City of Toronto Signing Bylaw 30.5 m Zone for "NO PARKING ANYTIME" at Signalized Intersection | Jan 2012 |
| 801.320 FIG 21 | City of Toronto Signing Bylaw for "NO PARKING ANYTIME" at Pedestrian Signal | Jan 2012 |
| 801.320 FIG 22 | City of Toronto Signing for "NO STOPPING ANYTIME" at Pedestrian Cross-Overs | Sep 2022 |
| 801.320 FIG 23 | City of Toronto Signing for "NO STANDING ANYTIME" at TTC Bus Stops | Jan 2012 |
| 801.320 FIG 24 | City of Toronto Signing for "NO STANDING ANYTIME" at TTC Street Car Stops on Roadways Less Than 16.5m Wide | Jan 2012 |
| 801.320 FIG 25 | City of Toronto Signing for "NO STANDING ANYTIME" at TTC Street Car Stops on Roadways Greater Than 16.5m Wide | Jan 2012 |
| 801.320 FIG 26 | City of Toronto Signing for "NO STANDING ANYTIME" at TTC Street Car Passenger Platforms | Jan 2012 |
| 802.001 | Electrical Handwell Cast-in-Place with320 mm Diameter Cover | Jan 2012 |
| 802.005 | Electrical Handwell Cast-in-Place with460 mm Diameter Cover | Jan 2012 |
| 802.006 | Precast Electrical Handwell with460 mm Diameter Cover | Jan 2012 |
| 802.010 | Electrical Handwell General Grounding Installation Requirements | Jan 2012 |
| 802.020 | Local Grading at Electrical Handwell | Jan 2012 |
| 802.021 | Installation of Handwell and Concrete Pole Bases in Medians | Jan 2012 |
| 802.025 | Entry of Direct Buried and Encased Ducts into Electrical Handwell | Sep 2024 |
| 802.026 | Electrical Handwell, Intercept Existing Duct in New Median Islands | Jan 2012 |
| 802.027 | Electrical Handwell Floating into Concrete Sidewalk | Sep 2024 |
| 803.001 | Duct Installation, Protection and Marking Within A Trench | Jan 2012 |
| 803.010 | Open Trench Duct Installation Profile | Jan 2012 |
| 804.001 | Traffic Signal Equipment Wiring Diagram | Jan 2012 |
| 804.002 | Wiring Assignment for Traffic Control Signals (Locations without Centre Median) | Jan 2012 |
| 804.003 | Wiring Assignment for Traffic Control Signals (Locations withCentre Median) | Jan 2012 |
| 804.005 | Schematic Wiring Diagram Typical Intersection without Centre Median | Jan 2012 |
| 804.006 | Illuminated Metro Pushbutton Wiring Details | Jan 2012 |
| 804.007 | Schematic Wiring Diagram Typical 2 Wire APS Detail | Jan 2012 |
| 804.010 | Schematic Wiring Diagram Typical Intersection withCentre Median | Jan 2012 |
| 804.015 | Splices for Traffic Signal Cables | Jan 2012 |
| 804.020 | Wood Poles withAerial Cables Lashed on Messenger | Jan 2012 |
| 804.025 | Installation of Traffic Signal Equipment on Direct Buried Poles, Underground Wiring | Sep 2025 |
| 804.035 | Aerial Traffic Signal Installation | Jan 2012 |
| 805.001 | Pole Handhole Orientation Details | Jan 2012 |
| 805.005 | Wood Pole in Earth | Jan 2012 |
| 805.010 | Back Guy Mounting Details | Jan 2012 |
| 805.015 | Temporary Traffic Signal Stand | Jan 2012 |
| 805.050 | Octagonal Steel Pole Base Mounting | Jan 2012 |
| 805.051 | Elliptical Galvanized Pole Base Mounting | Jan 2012 |
| 806.001 | Power Supply Disconnect Installation Details for Overhead Power Feed | Jan 2018 |
| 806.002 | Power Supply Disconnect Installation Details for Underground Power Feed | Jan 2012 |
| 806.004 | Power Supply Disconnect | Jan 2012 |
| 806.005 | Power Supply Disconnect Wiring Diagram | Sep 2024 |
| 806.010 | Power Supply and Grounding System | Jan 2012 |
| 806.015 | Traffic Signal Grounding System and Bonding System | Jan 2012 |
| 807.001 | Concrete Footing for Base Mounted Poles | Sep 2023 |
| 807.005 | Concrete Footing for Controller Type I | Jan 2012 |
| 807.006 | Concrete Footing for Controller Type 2 Including Sidewalk Pad | Jan 2012 |
| 807.007 | Controller Base Template | Jan 2012 |
| 807.010 | Anchor Assembly in Reinforced Sidewalk Bay | Jan 2012 |
| 807.011 | Concrete Footing for Base Mounted Push Button Pole | Jan 2012 |
| 807.012 | Anchor Assembly in Below Grade Reinforced Sidewalk Bay | Jan 2012 |
| 807.013 | Anchor Assembly for Base Mounted Push Button Pole in Reinforced Sidewalk Bay | Sep 2023 |
| 807.015 | Pole Anchor Assembly Type I | Jan 2012 |
| 807.016 | Pole Anchor Assembly Type II | Jan 2012 |
| 807.017 | 3/4" Dia. Preset Anchor Type DGR-1- 190mm Bolt Centre Dia. | Jan 2012 |
| 807.020 | Type I Controller Anchor Assembly | Jan 2012 |
| 807.025 | Local Grading at Pole Foundations | Jan 2012 |
| 808.001 | Installation of Traffic Signal Equipment on Steel Pole Direct Buried or Base Mounted | Sep 2025 |
| 808.005 | Single Member Arm Attachment Detail | Jan 2012 |
| 808.010 | Traffic Signal Head Mounting Detail | Jan 2012 |
| 808.012 | Installation of Bicycle Signal Equipment | Sep 2025 |
| 808.015 | Traffic Signal Head Installation on Centre Median | Jan 2012 |
| 808.020 | Signal Head Wiring Connection and JB Clamp | Jan 2012 |
| 808.030 | Special Back-to-Back Mounting Hardware | Jan 2012 |
| 808.035 | Transit Heads Mounting Bracket Details | Sep 2025 |
| 808.040 | Road and Street Name Over-Sized Sign Mounting Assembly | Jan 2012 |
| 808.042 | LRT Traffic Signal Equipment with U-Turns | Sep 2025 |
| 808.045 | LRT Traffic Signal Equipment Layout | Sep 2025 |
| 808.050 | Traffic Signal Head (Typical) | Jan 2012 |
| 808.055 | Traffic Signal Head Hanger 'A' | Jan 2012 |
| 808.060 | Traffic Signal Head Hanger 'B' | Jan 2012 |
| 808.065 | Traffic Signal Mast Arm Spigot | Jan 2012 |
| 808.070 | Traffic Mast Arm Mounting Plate for Steel Poles | Jan 2012 |
| 808.075 | Traffic Mast Arm Mounting Plate for Wood Poles | Jan 2012 |
| 808.080 | Traffic Mast Arm Mounting Plate for Wood Poles | Jan 2012 |
| 808.SPC | Aerial 2 Conductor Loop Feeder Cable Pole Attachment | Jan 2012 |
| 808.230 FIG 1 | UPS Side-by-Side and Stand-alone for New Applications | May 2020 |
| 808.230 FIG 2 | Concrete Footing for UPS Side-by-Side New Installations | May 2020 |
| 808.230 FIG 3 | UPS Piggy-Back Installation for New and Retrofit Applications | May 2020 |
| 808.230 FIG 4 | UPS Side by-Side Installation for Retrofit Application | May 2020 |
| 808.230 FIG 5 | UPS Concrete Footing Dimension Chart | May 2020 |
| 808.230 FIG 6 | Controller and UPS Wiring Connections | May 2020 |
| 809.001 | Traffic Signal Controller Installation | Jan 2012 |
| 809.005 | Cable Termination Board | Jan 2012 |
| 809.010 | Signal Wiring Connection to TB1 | Jan 2012 |
| 809.015 | Signal Wiring Connection to TB2 | Jan 2012 |
| 810.001 | Push Button Mounting Detail on Post | Sep 2025 |
| 810.002 | Push Button Mounting Details | Sep 2025 |
| 810.003 | Base Mounted Push Button Pole Details | Sep 2025 |
| 810.004 | Transit Loop Detector Installation Details | Jan 2012 |
| 810.005 | Loop Detector Installation Details | Jan 2012 |
| 810.006 | Loop Detector Installation Details 2 | Jan 2012 |
| 810.007 | Splices for Extra Low Voltage Cables and Loop Crossings of Road Cracks and Street Car Rails | Jan 2012 |
| 810.008 | Loop Detector Riser Installation Details | Jan 2012 |
| 810.009 | Transit Loop Detector Installation Details 2 | Jan 2012 |
| 810.010 | Typical Loop Layout Design Details | Jan 2012 |
| 810.011 | 2 Wire Navigator Accessible Pedestrian Signal Mounting Detail on Steel Traffic Pole | Jan 2012 |
| 810.012 | 2 Wire Navigator Accessible Pedestrian Signal Mounting Detail on Wood and Concrete Pole | Jan 2012 |
| 810.013 | Loop Detector Installation Details for Red Light Camera | Jan 2012 |
| 810.014 | Typical Non-Intrusive Traffic Sensor Detection Zone Layout Intersection: Major Street and Minor Street | Sep 2024 |
| 810.015 | Typical Non-Intrusive Traffic Sensor Detection Zone Layout Intersection: Major Street and Major Street | May 2022 |
| 810.016 | Typical Non-Intrusive Detection Aerial Span | Sep 2023 |
| 810.017 | Typical Non-Intrusive Detector Layout and Mounting | Sep 2024 |
| 810.018 | Typical SCATS Detection Zone Detail Design (Fixed Time-FT and Semi Actuated 1-SA1) | Mar 2025 |
| 810.019 | Typical SCATS Detection Zone Detail Design (Semi-Actuated Control) | Mar 2025 |
| 811.001 | Flashing Beacon and Sign Pole Mounted | Jan 2012 |
| 811.010 | Aerial Flashing Beacon Installation | Jan 2012 |
| 811.020 | Active Advance Flashing Beacon and Signage | Jan 2012 |
| 811.021 | Active Advance Flashing Beacon and Signage Pole Mounted (Solar Power) | Sep 2023 |
| 811.022 | Continuous Flashing Beacon and Signage Pole Mounted (Solar Power) | Sep 2023 |
| 811.025 | Active Advance Flashing Beacon Mounting Bracket Details | Jan 2012 |
| 812.001 | Level 1 Type A Pedestrian Crossover Aerial Installation | Sep 2025 |
| 812.005 | Level 1 Type A Split Pedestrian Crossover Pole Mounted Installation | Sep 2025 |
| 812.006 | Level 1 Type A Standard Pedestrian Crossover Schematic Wiring Diagram | Sep 2025 |
| 812.007 | Level 1 Type A Split Pedestrian Crossover Schematic Wiring Diagram | Sep 2025 |
| 812.010 | Mounting Brackets for Level 1 Type A Split Pedestrian Crossover Installation | Sep 2025 |
| 812.011 | Level 1 Type A Pedestrian Crossover Hardware Installation Types | Sep 2025 |
| 812.015 | Level 1 Type A Pedestrian Crossover Fixture Mounting on Guy Wire | Sep 2025 |
| 812.020 | Flashing Beacon Back-to-back Span Wire Mounting Hardware | Jan 2012 |
| 812.025 | Level 2 Type B Pedestrian Crossover Typical Plan View | Sep 2025 |
| 812.026 | Level 2 Type B Pedestrian Crossover Elevation View - AC Power | Sep 2025 |
| 812.030 | Level 2 Type B Pedestrian Crossover Schematic Wiring Diagram | Sep 2025 |
| 813.001 | Controller Cabinet Grounding System | Jan 2012 |
| 813.005 | Controller Cabinet Grounding | Sep 2025 |
| 815.001 | Installation of Nearside Bicycle Signal Head | Sep 2023 |
| 815.002 | Typical Bicycle Signal Head Layout At Bicycle Protected Intersection Setback Crossing | Sep 2023 |
| 815.003 | Typical Bicycle Signal Head Layout At Bicycle Protected Intersection Forward Stop Bar | Sep 2025 |